SAW PARTS REFERENCE LIST
Following are several parts identification drawings showing the replaceable sawparts common to all Laborsaber Diesaws. Simply find the part you need and call us for a quick replacement. A complete parts list is downloadable at bottom of this page.
In addition to common parts usage, one of the main features of a Laborsaber is its use of many standard components such as automotive v-belts, readily available from any auto parts store.
This was in keeping with the simple, yet efficient design objectives incorporated by Ollie S. Bohrer in his original, innovative retractable diesaw concepts in 1968.
In addition to common parts usage, one of the main features of a Laborsaber is its use of many standard components such as automotive v-belts, readily available from any auto parts store.
This was in keeping with the simple, yet efficient design objectives incorporated by Ollie S. Bohrer in his original, innovative retractable diesaw concepts in 1968.
HEAD, PUCK AND JIG UNIT
Order by Part name and/or Part Number if available and Saw Model
CLICK FOR LARGER IMAGE
|
PARTS CONTAINED IN THIS VIEW:
GUIDE POST LOCK SCREW SAW ON-OFF SWITCH GUIDE POST VACUUM TUBE PUCK PUCK SCREW DRILL PLUG BLADE GUIDE BLADE CHUCK CHUCK SCREW V-BLOCK RECIPROCATING SHAFT DRIVE PULLEY DRIVE BELT JIG UNIT JIG UNIT MOUNTING SCREWS (4) FOAM RUBBER GASKET |
ABOVE TABLE PARTS
Order by Part name and/or Part Number if available and Saw Model
CLICK FOR LARGER IMAGE
|
PARTS CONTAINED IN THIS VIEW:
38 Quill Stop Assembly 39 Quill Stop Lock Screw 40 Guide Post Lock Screw 41 Guide Post 42 Blade Covers 43 Guide Set Screws 44 Blade Guides 45 Puck 46 Puck Spring 47 Puck Locater 48 Puck Screw - Knurled 49 Puck Screw Spacer |
JIG UNIT ASSEMBLY PARTS
Order by Part name and/or Part Number if available and Saw Model
CLICK FOR LARGER IMAGE
|
PARTS CONTAINED IN THIS VIEW:
50 Blade Chuck 51 Knurled Blade Chuck Screw 52 Shaft Spring 53 Bronze bushings (2) 54 Curved Washer 55 Blade Chuck Screw 56 Reciprocating Shaft 57 SKF Bearings 58 Oil Seal 59 Crankshaft 60 Cross Head 61 Cross Head Pin 62 Cross Head Set Screws 63 Cover Plate gasket 64 Cover Plate 65 Oil Screw Gasket 66 Oil Screw 67 Cover Plate Screws 68 Jig unit Mount Screws 69 Jig Unit Mount Washers (special design) |
BELOW TABLE SAW PARTS
Order by Part name and/or Part Number if available and Saw Model
CLICK FOR LARGER IMAGE
|
PARTS CONTAINED IN THIS VIEW:
1 Jig Unit Assembly 2 Bell Crank Bracket 3 Bell Crank 4 Drill Cable 5 Drill Cable Bearing Block 6 Bearing Block Shoulder Bolt 7 Bell Crank Bushing 8 Lower Assembly Angle 9 Drill Linkage Shoulder Bolt 10 Spherical Rod End 11 Drill Linkage 12 Foot Pedal - Drill 13 Foot Pedal Bracket - Drill 14 Hinge 15 Platform 16 Bronze Bushing for Platform 17 Platform Line-up Pin 18 Steel Bushings - Bearing Block 19 Bearing Block 20 Cam Hangers 21 Cam Hanger Bushings 22 Cam Roller Shoulder Bolt 23 Cam Roller 24 Cam Pin 25 Cam Pin 'E' Rings 26 Cam 27 Cam Set Screw 28 Cam Spring Rod 29 Cam Spring Mounting Block 30 Cam Spring 31 Stop Pads 32 Stop Rod Bracket 33 Stop Rod 34 Jig Linkage Shoulder Bolt 35 Jig Linkage 36 Foot Pedal - Jig 37 Foot Pedal Bracket - Jig |
Dowload the complete parts list below:
| lbsbr_partslist.pdf |